Allflex applicators are designed to make livestock identification faster and more consistent, with tools developed for visual tags, electronic ID (EID/RFID) tags, and tissue sampling units (TSU).
This collection includes a mix of single-shot applicators, high-volume multi-shot applicators, and the replacement parts that keep your gear working when you’re tagging hard.
Recommended applicators by tag type
If you’re choosing an applicator, match it to the tag system you’re using (this is one of the biggest drivers of retention and avoiding device loss). ISC notes using the correct applicator (and a sharp, undamaged pin) is critical.
Cattle NLIS (EID/RFID) and two-piece tags (general yard work):
UTT3S is positioned by Allflex as a next‑gen applicator with reduced application force and easier switching between two‑piece and EID tags.
UltraMatic is described as a light handheld applicator suitable for Allflex Cattle NLIS tags.
Identiplier includes a flip‑pin/swivel action designed to reduce tearing risk if an animal pulls away during application.
High-volume visual tagging (two-piece visual tag range):
LazaMatic is listed by Allflex as suitable for the two‑piece visual tag range (buttons through Mini–Super Maxi) and uses a pistol-grip retraction mechanism for fast application.
A‑Tagger systems involve a sharp point—Allflex instructions emphasize safe handling and correct placement (between cartilage ribs; don’t use existing holes).
Sheep and goat high-throughput tagging:
RapIDMatic is a multi‑shot applicator used to apply RapID tags and SuperFlex (non‑EID) tags, loaded in strips of 20.
FlexiMatic is described by Allflex as a multi‑shot rapid‑fire applicator that can apply 25 FlexiTags before reloading.
DNA / tissue sampling workflows:
The Allflex TSU Applicator is used with the Tissue Sampling Unit (TSU) system for collecting tissue samples across species including cattle, sheep and pigs.
Feedlot / one‑piece tags:
Allflex describes its Manual Feedlot applicator as designed for safe feedlot tagging, with replacement anvil and pin available.
Replacement pins, anvils, and service parts
If tagging starts to feel inconsistent (misfires, hard squeezes, bent pins), the fix is usually maintenance, not “more force.” ISC specifically recommends checking the applicator pin is sharp and in good condition.
This collection includes common “keep-you-going” parts such as replacement pins (e.g., for UTT3S/LazaMatic/UltraMatic), jaw inserts, and replacement anvils.
For high-volume systems, a spare parts kit can help you service wear components before each tagging season (example: RapIDMatic spare parts kit).
Hygiene and best-practice (retention + animal welfare)
A clean applicator and clean tags reduce infection risk and help tags seat correctly. MLA specifically recommends keeping applicators clean and dipping in disinfectant between animals (when tagging).
ISC also advises using devices free from contamination, avoiding dirt/manure contamination, and cleaning/sanitising devices before and after application (disinfectant solution or rubbing alcohol are mentioned).
Best-practice checklist (quick and practical):
Keep applicators and tags clean; avoid contamination from manure or dirt.
Use the correct applicator for the device and ensure the pin is sharp and undamaged (a key driver of retention/device loss).
Disinfect the loaded applicator jaws (Allflex and Agriculture Victoria guidance supports disinfecting the applicator/tag at the point of application).
Follow disinfectant dilution instructions—Allflex warns incorrect dilution can irritate wounds.
Use appropriate restraint and apply devices quickly and decisively to minimize tissue damage and infection risk (ISC).
Guides & Related Products:
Allflex Tissue Sampling Units (TSU)
NLISCattle Tags |Allflex Cattle Tags
